Factory-terminated, project-configured fiber optic cable assembly for FTTH, FTTx, telecom rooms, data centers, outdoor cabinets, distribution boxes, and fast deployment projects.
Pre-terminated fiber optic cable assemblies are factory-terminated cable solutions designed to reduce field splicing and installation time in FTTH, FTTx, telecom rooms, data centers, outdoor cabinets, distribution boxes, and project fiber networks. The assembly includes optical fiber within a cable jacket, connector ends, strain relief boots, protective caps, and project-specified labeling or packaging. Connector type, cable type, fiber count, cable length, jacket material, optional pulling protection, and optical performance should be confirmed according to project requirements.
Request Quote Download DatasheetProduct Answer
What is pre-terminated fiber optic cable assembly?
Pre-terminated fiber optic cable assemblies are factory-terminated cables with connectors on one or both ends, ready for rapid installation in data centers, telecom networks, and enterprise infrastructure without field termination.
Compare pre-terminated assembly options to select the right type for your project.
| Requirement | Pre-Terminated Assembly | Field Terminated | Fusion Splice |
|---|---|---|---|
| Requirement | Pre-Terminated Assembly | Field Terminated | Fusion Splice |
| Installation Time | Minutes | Hours | Hours + equipment |
| Quality | Factory tested | Field dependent | Splicer dependent |
| Cost | Medium | Low (materials only) | High (splicer) |
| Best Pick | Rapid deployment | Budget projects | Permanent low-loss |
Confirmed structure guidance for project-configured pre-terminated fiber optic cable assemblies.
| Layer | Component | Material / Function |
|---|---|---|
| 1 | Optical Fiber | Single-mode or multimode fiber, subject to project requirements |
| 2 | Cable Jacket | FTTH / FTTx / indoor / outdoor / project-specified cable jacket |
| 3 | Connector End A | SC / LC / FC / ST / MPO / hybrid options, subject to confirmed configuration |
| 4 | Connector End B | Connectorized or project-specified end configuration |
| 5 | Strain Relief Boot | Provides connector-end bend protection and stress relief |
| 6 | Protective Cap | Protects connector end face before installation and during handling |
| 7 | Optional Pulling Protection | Pulling eye or pulling sock option, subject to confirmed configuration |
| 8 | Labeling / Packaging | Project-specified labeling, test record, and packaging requirements |
Typical values for reference. Final parameters depend on connector type, cable type, fiber count, jacket material, cable length, optical performance, and project requirements.
Typical guidance for reference. Final values depend on connector type, fiber type, cable structure, assembly quality, and test conditions.
| Parameter | Typical Guidance |
|---|---|
| Connector Type | SC / LC / FC / ST / MPO / hybrid options, subject to confirmed product range |
| Fiber Type | Single-mode / multimode, subject to project requirements |
| Cable Type | FTTH / FTTx / indoor / outdoor / project-specified cable, subject to confirmed configuration |
| Fiber Count | Subject to cable design and project requirements |
| Cable Length | Subject to project route length and installation slack requirement |
| Optional Pulling Protection | Subject to confirmed product configuration and route requirements |
| Documentation | Project-specific test data and compliance documentation can be provided upon request when required |
Factory-terminated cable links for faster access network installation.
Project-configured cable assemblies for cabinet and equipment interconnection.
Pre-installed fiber links for telecom rooms, ODFs, and distribution frames.
Connectorized cable routing between outdoor cabinet and distribution points.
Useful where field splicing should be minimized during network upgrade work.
Configure your Pre-Terminated Fiber Optic Cable Assembly requirements. Select connector type, fiber count, breakout style, cable type, and length, then send your RFQ by WhatsApp or email.
Project-based quotation support with streamlined supply coordination from Dongguan, China.
Fiber optic product supply support for contractors, distributors, network installers, and international project buyers.
Flexible customization: connector type, fiber type, length, color, packaging, and labeling per your project requirements.
In-house insertion loss and return loss testing per TIA/EIA-568 standards. Batch test records and project documentation can be provided according to order requirements.
FCL and LCL shipping from Shenzhen port. Express courier for small-batch and sample orders.
Engineering support for product selection, specification review, and sample approval before mass production.
Pre-terminated patch cords for patching between panels and equipment.
Outdoor-rated patch cords for FTTA and remote radio connections.
SC connector patch cables with single-mode and multimode options.
Fiber optic pigtails for fusion splicing and termination.
Fiber optic adapters for connector alignment and panel connection.
Field-installable connectors for quick FTTH termination.
Send connector type, cable type, fiber count, cable length, installation environment, labeling, packaging, and quantity for review.
