Which fiber optic cable is suitable for outdoor backbone routes?

Cable selection depends on the installation route. Aerial projects may use ADSS or another self-supporting structure. Duct and backbone routes commonly use central or stranded loose-tube cables, while direct-burial projects normally require additional armor and moisture protection.

What products are used for FTTH access projects?

FTTH access projects commonly use FTTH drop cables, fast connectors, patch cords, pigtails, and adapters for building entry, indoor wiring, aerial drop, and subscriber connection points.

Which products are suitable for data center patching?

Data center and equipment-room patching usually requires patch cords, pigtails, adapters, fast connectors, and pre-terminated fiber assemblies selected by connector type, polishing type, fiber mode, length, and cable management requirement.

Can MapleArashi support custom fiber optic cable projects?

Yes. MapleArashi can review drawings, target models, fiber count, sheath, armor, connector type, packing, labeling, and project requirements before providing a project-based quotation.

Are shipping costs included in MapleArashi quotations?

MapleArashi may quote under EXW, FOB, or CIF terms depending on the destination and shipment requirement. Each quotation states the applicable trade term, included costs, and whether international freight is included.

Fiber Optic Solutions by Application - FTTH, 5G, Data Center

What are MapleArashi fiber optic solutions?

MapleArashi solutions help telecom, ISP, FTTx, data center, and infrastructure buyers match fiber optic cables and connectivity products to outdoor backbone routes, FTTH access networks, equipment-room patching, and custom OEM project scenarios.

Buyers can use this page to compare application scenarios, recommended product groups, procurement notes, and RFQ requirements before selecting detailed product models.

Procurement Scenario Selection

Select the closest project scenario

Compare application scenarios, recommended product groups, technical selection factors, and quotation requirements before choosing a detailed product model.

Outdoor Backbone Routes

Outdoor Backbone / Duct Cable Projects

For telecom backbone, metro distribution, campus networks, and duct-based outdoor routes, MapleArashi recommends stranded loose tube and central loose tube outdoor fiber optic cables based on route length, fiber count, tensile load, and installation method.

Recommended productsGYTA, GYTS, GYXTW, ribbon fiber cables

Best forDuct installation, conduit routes, metro backbone, ISP distribution networks

Quotation noteSend fiber count, route length, sheath requirement, drum length, and destination port.

Outdoor Fiber Cables GYTA Fiber Optic Cable GYTS Fiber Optic Cable GYXTW Fiber Optic Cable

Direct Burial Routes

Direct Burial Fiber Cable Projects

For routes installed directly underground without continuous duct protection, armored outdoor fiber optic cables are used to improve crush resistance, rodent resistance, and mechanical protection.

Recommended productsGYTA53, GYTS53, armored outdoor fiber cables

Best forDirect burial routes, rural backbone, harsh outdoor installation, infrastructure projects

Quotation noteConfirm burial condition, armor type, fiber count, sheath material, and required drum length.

Armored / Direct Burial Cables GYTA53 Fiber Optic Cable GYTS53 Fiber Optic Cable

Aerial / ADSS Routes

Aerial and Self-Supporting Fiber Cable Projects

For pole-line and overhead routes, cable selection depends on span length, wind load, ice load, tensile strength, and whether the line requires all-dielectric construction.

Recommended productsADSS, figure-8 aerial cable, self-supporting outdoor fiber cables

Best forPole routes, rural access, utility corridors, aerial distribution networks

Quotation noteSend span length, installation environment, fiber count, sheath type, and sag/tension requirement if available.

Aerial / Self-Supporting Cables ADSS Fiber Optic Cable Figure-8 Fiber Optic Cable Aerial Cable Engineering Checklist

FTTH / FTTx Access

FTTH and FTTx Access Network Projects

For last-mile access networks, MapleArashi supplies drop cables and passive connectivity products used from distribution points to homes, apartments, buildings, and terminal boxes.

Recommended productsFTTH drop cable, fast connectors, patch cords, pigtails

Best forISP access rollout, FTTB, FTTH, MDU cabling, indoor-outdoor subscriber drops

Quotation noteConfirm cable type, length, connector type, fiber type, packing, and quantity.

FTTH Drop Cables Fast Connectors Patch Cords Pigtails

Patch & Termination

Patch, Termination and Equipment-Room Cabling

For ODF rooms, equipment cabinets, telecom rooms, and data center interconnects, MapleArashi supplies fiber patching and termination products based on connector type, polishing type, cable jacket, and required length.

Recommended productsPatch cords, pigtails, adapters, fast connectors, pre-terminated cable assemblies

Best forODF connection, cabinet wiring, equipment-room patching, telecom and data center interconnects

Quotation noteConfirm connector type, fiber mode, polish type, length, jacket material, and packing method.

Patch Cords Pigtails Adapters Pre-Terminated Cables

Custom OEM Projects

Custom OEM and Tender-Based Cable Supply

For project tenders, distributor programs, and OEM supply, MapleArashi can support custom cable marking, sheath color, drum length, packing, documentation, and product matching based on drawings or technical specifications.

Recommended productsCustom outdoor cable, OEM drop cable, project-based cable assemblies

Best forTender supply, distributor sourcing, non-standard cable requirements, private-label projects

Quotation noteSend specification sheet, drawing, fiber count, cable structure, quantity, destination, and required standard.

Send Project Requirement Browse Product Categories Outdoor Cable Options Compare Fiber Cable Quotations

Fiber Optic Solutions by Application