Outdoor self-supporting bow-type FTTH drop cable with FRP messenger and FRP strength members for dielectric pole-to-building access and last-mile subscriber routes.
Outdoor all-dielectric self-supporting figure-8 FTTH drop cable for aerial last-mile subscriber access.
Fiber count, fiber type, sheath color, and connector type should be confirmed according to final cable design and project requirements.
Request Quote Download DatasheetProduct Answer
What is GJYXFCH fiber optic cable?
GJYXFCH is an all-dielectric Figure-8 self-supporting FTTH drop cable with FRP messenger, designed for indoor-outdoor aerial installation where non-metallic construction is required.
Compare GJYXFCH with similar FTTH drop cable types.
| Requirement | GJYXFCH (Figure-8 FRP) | GJYXCH (Figure-8 Steel) | GJXH (Round Indoor) |
|---|---|---|---|
| Messenger | FRP (dielectric) | Steel wire | None |
| Fiber count | 1–2 fibers | 1–2 fibers | 1–2 fibers |
| Installation | Indoor-outdoor aerial | Indoor-outdoor aerial | Indoor only |
| All-dielectric | Yes | No | Yes |
| Best Pick | ★★★All-dielectric aerial | ★★★Steel messenger | ★★★Indoor riser |
GJYXFCH is an outdoor self-supporting FTTH drop cable with FRP messenger and FRP strength members. It is designed for dielectric pole-to-building access, last-mile FTTH routes, and subscriber drop links where non-metallic support is preferred.
| Layer | Component | Material / Function |
|---|---|---|
| 1 | Optical fiber | G.657A1 / G.657A2 / G.652D according to project requirement. |
| 2 | Drop cable body | Bow-type FTTH drop cable body for subscriber-side access. |
| 3 | Messenger | FRP messenger for dielectric self-supporting outdoor drop routes. |
| 4 | Strength members | Parallel FRP strength members for non-metallic tensile support. |
| 5 | Outer sheath | Outdoor sheath for pole-to-building and access network installation. |
| Fiber Type | Typical Attenuation | Application Note |
|---|---|---|
| G.657A1 | ≤0.36 dB/km @1310nm; ≤0.22 dB/km @1550nm | FTTH drop routes where bend performance is required. |
| G.657A2 | ≤0.36 dB/km @1310nm; ≤0.22 dB/km @1550nm | Recommended for tighter routing near subscriber entry points. |
| G.652D | ≤0.36 dB/km @1310nm; ≤0.22 dB/km @1550nm | Available when project design requires standard single-mode fiber. |
FRP messenger supports short outdoor aerial FTTH drop routes where non-metallic construction is preferred.
Designed for subscriber-side outdoor access connections in residential and small commercial FTTH networks.
Integrated FRP messenger and drop cable body simplify short aerial FTTH drop installation.
Compatible with G.657 series fibers for outdoor-to-building routing and access paths.
FRP components help reduce reliance on metallic support elements in the drop cable design.
Fiber count, fiber type, messenger requirement, sheath, packing length, and connector options can be confirmed per order.
| Model | Messenger / Strength | Typical Use | Selection Note |
|---|---|---|---|
| GJYXFCH | FRP messenger / FRP strength members | Outdoor dielectric self-supporting FTTH drop route | Use where non-metallic outdoor self-supporting drop design is preferred. |
| GJYXCH | Steel messenger | Outdoor self-supporting FTTH drop route | Use for short aerial subscriber drop routes requiring steel messenger support. |
| GJXFH | Indoor FRP flat drop | Protected indoor all-dielectric FTTH routes | Use for indoor non-metallic subscriber-side routing. |
| GJXH | Indoor steel wire flat drop | Protected indoor FTTH routes | Use after building entry where steel wire strength members are acceptable. |
Outdoor drop route from distribution point to subscriber premises.
Self-supporting outdoor access route between pole and building entry point.
Outdoor-to-building access section before indoor routing begins.
Short outdoor FTTH access links in residential or small commercial networks.
Connection from outdoor terminal box to wall-mounted access point.
Used where the project drawing calls for self-supporting outdoor FTTH drop cable.
GJYXFCH is intended for a short self-supporting outdoor FTTH drop where the route requires a non-metallic design with FRP messenger and FRP strength members. The material requirement must be confirmed from the route and project specification. Record the support points, outdoor exposure, cable path to the building, required fiber, and final termination method before approving an assembly or bulk cable order.
The aerial access route is short and the approved design requires dielectric self-supporting construction rather than a steel messenger.
A steel messenger is specified for the aerial route, which points to GJYXCH; protected indoor routes point to GJXFH or GJXH; longer spans require a separate ADSS engineering review.
Confirm the dielectric requirement, support-point spacing, outdoor route, fiber type, jacket, cable length, labels, packing, and the building-entry transition.
Configure the key requirement for GJYXFCH Outdoor Self-Supporting FTTH Drop Cable. Select standard options or enter custom notes, then send your RFQ by WhatsApp or email.
Self-supporting FTTH drop cable for aerial access.
Bow-type FTTH drop cable for subscriber connection.
Flat FTTH drop cable for indoor and access wiring.
FTTH drop cable for indoor access installation.
Vertical FTTH drop cable for access network wiring.
FTTH drop cable for last-mile access networks.
Compare indoor and outdoor use, FRP or steel reinforcement, messenger design and route requirements.
Read the FTTH comparison guide →
